Banner
Banner Materials — Vinyl, Mesh, Blockout & Fabric
Laird Plastics supplies banner materials for high-impact graphics: 13 oz & 18 oz scrim vinyl, mesh banner for wind-exposed sites, blockout/double-sided media, smooth print vinyl, and polyester fabric. Options for hem/grommet finishing, pole pockets, and matched laminates.
Use when you need: large promotional graphics, street pole banners, building wraps, event signage, retail POP.
13 oz & 15 oz Scrim Vinyl
Workhorse banner material for everyday indoor/outdoor use. Tear-resistant base scrim, strong weldable hems, and excellent printability for solvent, latex, and UV.
Keywords: 13 oz banner vinyl, welded hems, grommets, outdoor banner
18 oz Heavy-Duty/Blockout Vinyl
Thicker face film with an opaque core to prevent show-through. Ideal for double-sided street pole banners and long-term exterior installs.
Keywords: 18 oz blockout banner, double-sided banner material
Mesh Banner (Airflow/Wind)
Perforated vinyl lets wind pass through—great for fences, stadiums, and building wraps. Use with perimeter hemming or reinforced tape for strength.
Keywords: mesh banner material, fence banner, building wrap
Smooth Vinyl & Polyester Fabric
Smooth print surfaces for near-photographic quality; fabric banners offer a soft hand and reduced glare for indoor events and retail environments.
Keywords: smooth banner vinyl, fabric banner, dye-sub fabric
Banner Media at a Glance — Quick Facts
| Printer compatibility | Solvent, eco-solvent, latex, UV (verify by SKU) |
|---|---|
| Typical weights | 13 oz, 15 oz, 18 oz (heavier = more durability/opacity) |
| Blockout | Opaque core prevents show-through for double-sided graphics |
| Mesh open area | Commonly 30–40% (improves wind performance) |
| Finishing | Hem/weld, pole pockets, grommets, reinforced corners, tapes |
| Common widths | 38", 54", 60", 63", 72" (varies by product) |
| Outdoor durability | Short-term promo to multi-year (grade, environment & finishing) |
When to Choose Each Banner Type
- 13 oz scrim: everyday outdoor promos and indoor hanging banners.
- 18 oz blockout: double-sided street pole and long-term installs.
- Mesh: high-wind areas, fences, and building wraps.
- Smooth/fabric: premium indoor graphics, retail, events.
Finishing Tips for Longevity
- Use welded hems or hem tape for strength; grommet every 24–36".
- Add reinforced corners for large banners or windy sites.
- For mesh, avoid fully solid backer walls; allow airflow.
Banner Materials – FAQs
What weight banner vinyl should I use?
13 oz is great for most uses; choose 18 oz blockout for double-sided or long-term outdoor banners.
When should I use mesh banner?
Use mesh in windy locations (fences, stadiums, scaffolding) to reduce wind load and tearing.
Can I print on both sides of a banner?
Yes—use blockout/double-sided material with an opaque layer to prevent show-through.
Which printers work with banner material?
Most banner media support solvent, eco-solvent, latex, and UV inks—check the product page for specifics.
Do you offer finishing and cut-to-size?
Yes—Laird Plastics can cut to size and provide finishing recommendations. Contact us for a quote.
Need Help Choosing Banner Media?
Talk to Laird Plastics about material weight, airflow needs, finishing options, and printer compatibility. Get the durability and print quality your job demands.
